EZYAirbus
Topic Author
Posts: 2322
Joined: Sun Sep 07, 2003 4:57 am

Motiv Problem?

Mon Aug 21, 2006 4:36 am

I spent yesterday at AMS and see JAL Cargo 747 taking off, i decided to shoot it with AMS tower in too, would it get reject for motiv? also is quality ok for Anet?

http://www.airliners.net/uf/view.fil...2248&filename=1156102096pR0z6O.jpg

Glenn
http://www.glenneldridgeaviation.com
 
9VSPO
Posts: 4187
Joined: Sun May 18, 2008 9:03 pm

RE: Motiv Problem?

Mon Aug 21, 2006 4:42 am

Quoting EZYAirbus (Thread starter):
is quality ok for Anet?

I like it but as you probably know it's getting harder and harder on here to pics accepted. Given the quality required I would say the aircraft is a bit too far away.
 
JRadier
Posts: 3943
Joined: Mon Sep 27, 2004 11:36 pm

RE: Motiv Problem?

Mon Aug 21, 2006 4:56 am

Quoting 9VSPO (Reply 1):
Given the quality required I would say the aircraft is a bit too far away.

image quality and distance are 2 totally difirent things. I let some more expirienced people give some comment tho.
For once you have tasted flight you will walk the earth with your eyes turned skywards, for there you have been and ther
 
bottie
Posts: 244
Joined: Sun May 30, 2004 12:53 am

RE: Motiv Problem?

Mon Aug 21, 2006 5:27 am

I think a bad_distance is possible, also bad_centered. The plane isn't in the middle because the tower 'has to be' in the picture to make it a special picture. For me, just crop the plane, drop the tower  Smile
 
User avatar
jumbojim747
Posts: 2426
Joined: Sat Oct 16, 2004 8:05 pm

RE: Motiv Problem?

Mon Aug 21, 2006 6:46 am

Glenn i would crop the wing tip out all the way to the engine and that way it would be easier to center it with the tower providing you have more room to work with in the original .
Also the contrast is very high i would tone it down a bit.
Nice shot and good luck with it.
Cheers
On a wing and a prayer
 
eadster
Posts: 2125
Joined: Tue Jan 25, 2005 7:31 pm

RE: Motiv Problem?

Mon Aug 21, 2006 8:27 am

And sharpen it - it's heaps soft here.

Who is online

Users browsing this forum: No registered users and 5 guests