757er
Posts: 9
Joined: Tue Aug 03, 2010 4:36 pm

Pre-screening

Tue Nov 20, 2012 11:24 am

Hello,

What do you think of this picture?
http://farm9.staticflickr.com/8348/8201153452_3a88c92740_o.jpg

[Edited 2012-11-20 03:24:33]
 
dazbo5
Posts: 2717
Joined: Tue Mar 29, 2005 8:05 am

RE: Pre-screening

Tue Nov 20, 2012 12:24 pm

Quoting 757ER (Thread starter):
What do you think of this picture?

There's too much dead space around the aircraft, you need to crop it tighter. The quality isn't great either. The fence line on the landing gear may bring a motive rejection. I would be surprised if this one got through screening.

Darren
Equipment: 2x Canon EOS 50D; Sigma 10-20 EX DC HSM, 50-500 EX APO DG, Canon 24-105 f/4 L, Speedlite 430EX
 
757er
Posts: 9
Joined: Tue Aug 03, 2010 4:36 pm

RE: Pre-screening

Tue Nov 20, 2012 9:40 pm

Ok thanks a lot. I completely missed the fence line on the landing gear. When you see quality what do you mean? Sharpness or noise?
I have another one from another spot
http://farm9.staticflickr.com/8065/8204396348_53038c7190_o.jpg

[Edited 2012-11-20 13:41:31]
 
dlowwa
Posts: 7168
Joined: Tue Apr 12, 2005 4:17 pm

RE: Pre-screening

Tue Nov 20, 2012 9:46 pm

Quoting 757ER (Reply 2):
I have another one from another spot

This one is oversharpened and has many dust spots.
 
757er
Posts: 9
Joined: Tue Aug 03, 2010 4:36 pm

RE: Pre-screening

Tue Nov 20, 2012 10:30 pm

 
dlowwa
Posts: 7168
Joined: Tue Apr 12, 2005 4:17 pm

RE: Pre-screening

Tue Nov 20, 2012 10:37 pm

Quoting 757ER (Reply 4):
Any better or too soft now?

Better, but still has a few dust spots.
 
757er
Posts: 9
Joined: Tue Aug 03, 2010 4:36 pm

RE: Pre-screening

Tue Nov 20, 2012 10:41 pm

Hey thanks a lot for your help. Ι must clean my sensor  
Should I leave the sharpness as it is? I am not a big fan of oversharpenning but all the rejections so far where for soft and I guess I am oversharpenning now  
 
dlowwa
Posts: 7168
Joined: Tue Apr 12, 2005 4:17 pm

RE: Pre-screening

Wed Nov 21, 2012 12:53 am

Quoting 757ER (Reply 6):
Should I leave the sharpness as it is?

Still looks a bit sharp, but at least better than the previous version.

Who is online

Users browsing this forum: Elmdon and 1 guest