Search found 116 matches

by gregorygoodwin
Sun Jul 17, 2022 10:22 pm
Forum: Technical/Operations
Topic: Question for Gulfstream Aerospace Mechanics
Replies: 9
Views: 1532

Re: Question for Gulfstream Aerospace Mechanics

Where I work (FX in Indianapolis), we all have our own tools. The company does provide tooling and has a staffed tool room. From what I have seen, some airlines in other parts of the world provide their mechanics with a stocked tool box appropriate to their job rating. For instance, if you work avio...

Jump to post
by gregorygoodwin
Mon Jul 11, 2022 10:09 pm
Forum: Technical/Operations
Topic: being a mechanic for a 787
Replies: 13
Views: 2837

Re: being a mechanic for a 787

Horstroad, I have to admit that I'm not sure of the specifics of how the Federal Aviation Regulations (FAR) allow this. I do know that there are FBO operations that have unlicensed maintenance personnel. It may be that they are under a more stringent inspection requirement on the work performed. In ...

Jump to post
by gregorygoodwin
Sun Jul 10, 2022 10:37 pm
Forum: Technical/Operations
Topic: being a mechanic for a 787
Replies: 13
Views: 2837

Re: being a mechanic for a 787

As stated in the above posts, you can work on aircraft without an A & P certificate, but I strongly advise having it. I work at FedEx, and if you work out on the aircraft, you must have your tickets. I would assume most of the majors are this way. Otherwise, you can work at a fixed base operator...

Jump to post
by gregorygoodwin
Thu Jun 23, 2022 11:50 pm
Forum: Technical/Operations
Topic: Aircraft headings, bearings, and such.
Replies: 31
Views: 2034

Re: Aircraft headings, bearings, and such.

Wow! This seems to be an interesting subject. I thank each and every one of you for responding, As a non-pilot member of the forum, it is still somewhat confusing to me, but I have learned a lot from this post. Another question. If headings and navigation are centered along magnetic lines, and if th...

Jump to post
by gregorygoodwin
Wed Jun 22, 2022 5:03 pm
Forum: Technical/Operations
Topic: Aircraft headings, bearings, and such.
Replies: 31
Views: 2034

Re: Aircraft headings, bearings, and such.

Thanks for the answers. I assume that when you say you would turn the short direction, it means you, the pilot turn the yoke. If you are on autopilot, flying due north and are told to turn to 270, you dial this in, does the flight computers also turn the short direction? Can you direct it to do othe...

Jump to post
by gregorygoodwin
Tue Jun 21, 2022 8:58 pm
Forum: Technical/Operations
Topic: Aircraft headings, bearings, and such.
Replies: 31
Views: 2034

Re: Aircraft headings, bearings, and such.

So, if you were flying a due north and were instructed to turn to 270 degrees, would you go right three quarters of the way around the circle , or turn left 90 degrees? As you can tell, I'm not a pilot, but it seems to me that in situations where the flight is told to make numerous course changes, i...

Jump to post
by gregorygoodwin
Mon Jun 20, 2022 8:40 pm
Forum: Technical/Operations
Topic: Aircraft headings, bearings, and such.
Replies: 31
Views: 2034

Aircraft headings, bearings, and such.

I'm working my way through a textbook on trigonometry, a subject I've never studied, but find fascinating due to all of it's applications. In the text it shows two ways of expressing bearings. One method is when a single angle is given, it is understood that bearing is measured in a clockwise direct...

Jump to post
by gregorygoodwin
Wed Jun 15, 2022 8:40 pm
Forum: Technical/Operations
Topic: Decals and flags
Replies: 8
Views: 2574

Re: Decals and flags

It most definitely depends on where the decal is. The registration numbers and flag can go for several years. I suspect that the main reason they let go is that the edge sealer becomes aged and brittle, then the slipstream will peel them up or a de-icing sprayer hits them. The decals on the front of...

Jump to post
by gregorygoodwin
Tue Jun 14, 2022 10:35 pm
Forum: Technical/Operations
Topic: Decals and flags
Replies: 8
Views: 2574

Decals and flags

I have no question to present, instead it's a look into what goes on in the maintenance side of things. Recently, I was tasked with removing a deteriorated American flag on one of our B767-300F's. The flag is located just aft of the registration numbers on the aft fuselage. I found out that there ar...

Jump to post
by gregorygoodwin
Sat May 14, 2022 9:42 pm
Forum: Technical/Operations
Topic: Question for Mechanics
Replies: 14
Views: 4022

Re: Question for Mechanics

I strongly urge her to get the A & P licenses, both of them. I was also in the Navy as a air-frame maintenance mechanic. I was signed off by the FAA to take the general and air-frame test for the A license. Instead, I went ahead with a A & P school program ( G.I.bill funded) and obtained bot...

Jump to post
by gregorygoodwin
Fri May 06, 2022 9:07 pm
Forum: Technical/Operations
Topic: FDX EVS and Adoption Across Airlines
Replies: 8
Views: 1312

Re: FDX EVS and Adoption Across Airlines

Why does the system work better with incandescent lighting than LED? I assume that this refers to the approach/runway lights. We install the system on our B767-300F planes here in IND and I have heard one of our avionics technicians mention this.
Gregory

Jump to post
by gregorygoodwin
Sun Apr 24, 2022 9:53 pm
Forum: Technical/Operations
Topic: 787 with extensive wing paint peel?
Replies: 35
Views: 7821

Re: 787 with extensive wing paint peel?

I see this quite often on our aircraft, including the B757 and MD11's. The 767's are holding up fairly well so far. As for flying with paint missing on a composite surface, the SRM allows a time limit that is more than you would think. If I recall correctly, the 757 and 767 can go for one thousand h...

Jump to post
by gregorygoodwin
Tue Apr 12, 2022 8:35 pm
Forum: Technical/Operations
Topic: Location of data plate on Airbus aircraft
Replies: 17
Views: 2673

Re: Location of data plate on Airbus aircraft

Read the insert by DLMech on the code of federal regulations, most interesting. Goes to show that you can always learn something new about aviation even if you have been in the industry for many years. Especially like the part about manned free balloons requiring a data plate, had never considered t...

Jump to post
by gregorygoodwin
Mon Apr 11, 2022 9:02 pm
Forum: Technical/Operations
Topic: Location of data plate on Airbus aircraft
Replies: 17
Views: 2673

Re: Location of data plate on Airbus aircraft

, Interesting information on the fuselage mounted data plate. I have never heard of this. But why would a commercial airliner have a plate stipulated by an E.A.A. regulation? I have seen what the other post is calling a "trust plate", just not on the airframe itself but on the engines. You...

Jump to post
by gregorygoodwin
Sun Apr 10, 2022 3:51 pm
Forum: Technical/Operations
Topic: Location of data plate on Airbus aircraft
Replies: 17
Views: 2673

Re: Location of data plate on Airbus aircraft

Something of interest along the lines of this topic. When we (FX) began to receive our 757 conversion aircraft, I recall seeing a small data plate on the right side of the fuselage just aft of the pressure bulkhead. This was years ago and it was on maybe two aircraft and I've never seen them since. ...

Jump to post
by gregorygoodwin
Fri Feb 18, 2022 11:50 pm
Forum: Technical/Operations
Topic: Pre-Departure Walkaround Top of Fuselage
Replies: 20
Views: 4280

Re: Pre-Departure Walkaround Top of Fuselage

I often get general visual inspection (GVI) cards that instruct me to inspect the upper fuselage lobe and it will specifically state that it is to be accomplished from ground level. There is rarely any damage to the crown skin area. If one is available, I will take a man-lift and go up to the upper ...

Jump to post
by gregorygoodwin
Tue Feb 15, 2022 9:15 pm
Forum: Technical/Operations
Topic: Bombardier Tucson
Replies: 1
Views: 1590

Re: Bombardier Tucson

I can't give guidance for you on Bombardier. But, if you are a A&P license holder with no experience, you might want to look into the FedEx maintenance training program (MTP). They take candidates who have obtained their A&P license and send them through a training program where they are rot...

Jump to post
by gregorygoodwin
Tue Feb 15, 2022 8:58 pm
Forum: Technical/Operations
Topic: Did Douglas or Convair design the ill-fated cargo door/cargo door latching system?
Replies: 3
Views: 1654

Re: Did Douglas or Convair design the ill-fated cargo door/cargo door latching system?

In the story that I read, I can't remember if the door failed in testing or not. It seems that it could be very well possible as the builder of the door would most likely do tests to certify it. And, as stated in the book, the builder sent letters to Douglas that they had serious concerns with the d...

Jump to post
by gregorygoodwin
Mon Feb 14, 2022 10:20 pm
Forum: Technical/Operations
Topic: Did Douglas or Convair design the ill-fated cargo door/cargo door latching system?
Replies: 3
Views: 1654

Re: Did Douglas or Convair design the ill-fated cargo door/cargo door latching system?

I read a book about the DC 10 crashes that were brought about by the cargo door failure. It has been a few years back, but I think it was titled " The Flight 981 Disaster". If I remember correctly, the design was by Douglas and built by a subcontractor. In the story, the subcontractor noti...

Jump to post
by gregorygoodwin
Thu Feb 03, 2022 11:25 pm
Forum: Technical/Operations
Topic: Peeling paint on composite surfaces.
Replies: 9
Views: 3049

Re: Peeling paint on composite surfaces.

We changed out yet another MD11 outboard elevator last week for severely deteriorated paint. In this case, it seems the aluminum flame-spray under the paint was either burnt or melted, maybe from a heavy lightening strike. Anyway, the amount of surface that would require rework would have meant that...

Jump to post
by gregorygoodwin
Tue Jan 25, 2022 8:03 pm
Forum: Technical/Operations
Topic: Quality of Aviation Consultants around the World
Replies: 6
Views: 1630

Re: Quality of Aviation Consultants around the World

I agree with fr8mech, you should send a response to the publication. Your argument is well presented in your post. It is well written, concise, and provides examples and you seem to know something about aircraft and aviation history. They may decide you are a better contributor for them on aviation ...

Jump to post
by gregorygoodwin
Sun Jan 23, 2022 12:53 am
Forum: Technical/Operations
Topic: Peeling paint on composite surfaces.
Replies: 9
Views: 3049

Peeling paint on composite surfaces.

Hello everyone, As some of you may have read, Qatar Airlines and Airbus are in a disagreement over the peeling paint on Qatar's new A350's. If you have seen photographs of the paint, it looks like the paint has bubbled or blistered up, cracked and left voids that exposed the underlying anti-static m...

Jump to post
by gregorygoodwin
Mon Oct 04, 2021 2:55 pm
Forum: Technical/Operations
Topic: If snubbers failed to stop wheel rotation during retraction, would this adversely affect the airplane?
Replies: 8
Views: 1490

Re: If snubbers failed to stop wheel rotation during retraction, would this adversely affect the airplane?

We frequently have to replace the pads on our B767s when they come in for B-checks (actually its called an L-check now). The pads are mounted on two spring arms and are of some type of abrasive composite material. The attaching bolts are counter-bored down into the material but as the wheels abrade ...

Jump to post
by gregorygoodwin
Mon Oct 04, 2021 2:34 pm
Forum: Technical/Operations
Topic: Which airliners are able to use APU while airborne?
Replies: 10
Views: 1855

Re: Which airliners are able to use APU while airborne?

Does the APU have to be able to start and run during flight have anything to do with being category 3 flight able?

Jump to post
by gregorygoodwin
Tue Sep 21, 2021 7:32 pm
Forum: Technical/Operations
Topic: What are the three vertical lines on the MD-11 radome?
Replies: 7
Views: 2243

Re: What are the three vertical lines on the MD-11 radome?

These strips are not repairable locally if they are damaged, such as segments missing or de-bonded, which does happen. They are sent back to the manufacturer or a certified repair station. On our MD's, if the strips are damaged in some way, the radome is sent to Nordam in Tulsa, OK.
Gregory

Jump to post
by gregorygoodwin
Tue Sep 14, 2021 5:25 pm
Forum: Technical/Operations
Topic: BCF and BDSF designations.
Replies: 6
Views: 1501

Re: BCF and BDSF designations.

Thanks for the replies. I'm somewhat familiar with the warranty conditions mentioned in 747classic's informative post. Our B767-300Fs are all Boeing factory built, but the B757-200s were converted at Mobile, AL by ST. When any issue arrives with any of the parts installed by them in the conversion p...

Jump to post
by gregorygoodwin
Mon Sep 13, 2021 4:31 pm
Forum: Technical/Operations
Topic: BCF and BDSF designations.
Replies: 6
Views: 1501

BCF and BDSF designations.

Does anyone know the differences between the Boeing Converted Freighter (BCF) and the BDSF designations? Not sure if the BDSF is a Boeing Designed Special Freighter or if it was a Bedek conversion. I have always assumed that the BCFs were ships that were converted at a Boeing licensed facility but n...

Jump to post
by gregorygoodwin
Sat Aug 28, 2021 10:49 pm
Forum: Technical/Operations
Topic: Around the weather
Replies: 17
Views: 2469

Re: Around the weather

Starlionblue mentions that you must sometimes thread your way through thunderstorm cells. The question I have is maybe slightly off topic, but I've always wondered how you can deviate from a set course, thread your way through thunderstorms, and then return to your original course of travel. Is it l...

Jump to post
by gregorygoodwin
Mon Aug 23, 2021 10:09 pm
Forum: Technical/Operations
Topic: "Silver dollar patch"?? MD-95 /Boeing 717
Replies: 5
Views: 1419

Re: "Silver dollar patch"?? MD-95 /Boeing 717

I think the reference is to the circular repair doubler used for small punctures or dents that are beyond limits. You can find them in some of the SRMs under the typical repair schemes. You are limited in where these repairs can be used, especially on pressurized structure. They are some times calle...

Jump to post
by gregorygoodwin
Sat Aug 21, 2021 10:47 pm
Forum: Technical/Operations
Topic: BAC R15-FV (BRILES) rivets
Replies: 7
Views: 1834

Re: BAC R15-FV (BRILES) rivets

Honestly, I can't answer your query. I'm not familiar with this aircraft or what its intended mission was. At the time it was built, it was common to see non-flush fasteners on aircraft. For example, you see a lot of protruding head rivets on DC-3s and B-17s and many other ships of this era. My best...

Jump to post
by gregorygoodwin
Wed Aug 18, 2021 9:03 pm
Forum: Technical/Operations
Topic: CFRP & FGRP
Replies: 6
Views: 1337

Re: CFRP & FGRP

I can only answer this from what I have seen on the aircraft we work on (B757-200, B767-300F, MD10-30, MD11, A300, and B777-200F). In terms of the cure temperature of a composite layup, the higher your cure temp. the more durable your layup will be. A three fifty degree cured layup will be superior ...

Jump to post
by gregorygoodwin
Wed Aug 18, 2021 8:26 pm
Forum: Technical/Operations
Topic: BAC R15-FV (BRILES) rivets
Replies: 7
Views: 1834

Re: BAC R15-FV (BRILES) RIVETS

The amount of rise above the surrounding surface for a correctly installed briles rivet is only in the area of maybe two to four thousandths of an inch. The crown of the rivet is a smooth domed shaped that is probably negligible in drag. Also, if you ever look closely at a MD10 or MD11, the producti...

Jump to post
by gregorygoodwin
Mon Aug 16, 2021 2:17 pm
Forum: Technical/Operations
Topic: CFRP & FGRP
Replies: 6
Views: 1337

Re: CFRP & FGRP

In the SRM, they are denoted as CFRP and GFRP. As stated in the above posts, they are carbon fiber (CFRP) and fiberglass (GFRP). What can confuse some is the GFRP reference. I've heard it called graphite fiber reinforced plastic which is not correct. One interesting thing about the fiberglass is tha...

Jump to post
by gregorygoodwin
Mon Aug 16, 2021 1:46 pm
Forum: Technical/Operations
Topic: BAC R15-FV (BRILES) rivets
Replies: 7
Views: 1834

Re: BAC R15-FV (BRILES) RIVETS

You don't shave the briles type rivets after installation. If done correctly, they have a domed appearance that is slightly higher than the surrounding surface. This is normal for these rivets. Another type of rivet not normally shaved is the NAS1097 type. It is a countersunk style rivet that is usu...

Jump to post
by gregorygoodwin
Wed Aug 11, 2021 9:33 pm
Forum: Technical/Operations
Topic: Question For the Mechanics: Which Commercial Aircraft Have Been Easiest and Most Difficult For You to Work On?
Replies: 71
Views: 14488

Re: Question For the Mechanics: Which Commercial Aircraft Have Been Easiest and Most Difficult For You to Work On?

As I mentioned in my above post, I've worked the structural side of maintenance my entire career. The B727 had a good SRM and was, from a structures point of view, a good plane to work on. However, it could make you so exasperated that you wanted to hand in your company badge and quit. One of these ...

Jump to post
by gregorygoodwin
Sat Jul 17, 2021 10:48 pm
Forum: Technical/Operations
Topic: Protective corrosion coatings and aerodynamics
Replies: 7
Views: 1126

Re: Protective corrosion coatings and aerodynamics

Maybe I can provide some answers. Composites on aircraft, especially on the exterior of the plane, are virtually always painted surfaces. This is because ultraviolet light, such as sunlight, will degrade the composite resins. Most of the resins used in fiberglass, carbon fiber, and hybrid lay-ups, s...

Jump to post
by gregorygoodwin
Fri Jul 16, 2021 11:25 pm
Forum: Technical/Operations
Topic: Question For the Mechanics: Which Commercial Aircraft Have Been Easiest and Most Difficult For You to Work On?
Replies: 71
Views: 14488

Re: Question For the Mechanics: Which Commercial Aircraft Have Been Easiest and Most Difficult For You to Work On?

In my career in aircraft maintenance, I've always worked structures and composites. For me, the Lockheed L1011 had one of the best structural repair manuals. It was simple, straight-forward, and gave you clear and concise graphics and information. The aircraft itself was easy to work on as it was a ...

Jump to post
by gregorygoodwin
Wed Mar 17, 2021 8:52 pm
Forum: Technical/Operations
Topic: Ligthning Strikes.
Replies: 12
Views: 2781

Re: Ligthning Strikes.

An update to this topic. I was recently called over to our flight line in IND to do a visual evaluation of a lightning strike on a MD10-30. When we arrived we were shown a deep dent on the forward right side of the nose of the ship. At first, I thought that this couldn't be lightning strike damage, ...

Jump to post
by gregorygoodwin
Wed Mar 17, 2021 8:26 pm
Forum: Technical/Operations
Topic: HUD on commercial aircraft.
Replies: 8
Views: 1947

Re: HUD on commercial aircraft.

For us at FedEx, apparently there is a profitable case. All of our ships have HUD's. Although I'm not totally sure about our Airbus A300's. Our MD10's, MD11's, B757's, and B767's all have HUD's installed. What may be different with our system is that it is coupled with a Forward Looking Infrared opt...

Jump to post
by gregorygoodwin
Thu Feb 25, 2021 10:55 pm
Forum: Technical/Operations
Topic: Ligthning Strikes.
Replies: 12
Views: 2781

Re: Ligthning Strikes.

Great stories and responses! Thanks guys! It's amazing when you see lightning in storms hitting the ground and what power it has, that a aircraft can take that kind of hit and keep going. The strange laws of physics!

Gregory

Jump to post
by gregorygoodwin
Wed Feb 24, 2021 9:51 pm
Forum: Technical/Operations
Topic: Ligthning Strikes.
Replies: 12
Views: 2781

Ligthning Strikes.

I have not been on a flight that has taken a lightning strike, at least not one I was aware of. I was wondering if any of the flight crew followers of this forum could share info on this. Do you know for sure when you take a strike or suspect that the ship has taken a strike? I work in the structure...

Jump to post
by gregorygoodwin
Mon Feb 22, 2021 5:55 pm
Forum: Technical/Operations
Topic: Delta 757 Wing And Stabilizer Paint
Replies: 10
Views: 3562

Re: Delta 757 Wing And Stabilizer Paint

Our 767-300F aircraft have Aerofex on the wing surfaces between the forward and aft spars, upper surface and lower. The fixed leading edges, aft trailing edges and flap track fairings all use BAC 707 light gray which is a polyurethane coating. As mentioned above, the Aeroflex is a dark gray metal-fl...

Jump to post
by gregorygoodwin
Mon Feb 15, 2021 10:05 pm
Forum: Technical/Operations
Topic: Powering systems inside a hangar
Replies: 14
Views: 2632

Re: Powering systems inside a hangar

At our hangar here in IND, there is an over-head power drop-down station, some hangars have floor recessed power stations. The station has ground power for the aircraft, two air hoses for maintenance purposes, and 120V power, again, used for maintenance purposes. Each aircraft bay has this. The airc...

Jump to post
by gregorygoodwin
Tue Jan 05, 2021 9:50 pm
Forum: Technical/Operations
Topic: How do airlines manage maintenance inspections at the spokes?
Replies: 24
Views: 3578

Re: How do airlines manage maintenance inspections at the spokes?

Our operation seems to have some kind of maintenance personnel at all of the out stations, whether it be company or vendor. Our hubs for maintenance are Memphis, Indianapolis, and Los Angeles. Most of the ships will make it to one of these bases daily. The out stations are usually supplied with the ...

Jump to post
by gregorygoodwin
Sun Dec 20, 2020 11:04 pm
Forum: Technical/Operations
Topic: Do cargoliners have locked cockpit doors? Or cockpit doors for that matter?
Replies: 26
Views: 4133

Re: Do cargoliners have locked cockpit doors? Or cockpit doors for that matter?

All of our freighters have doors here at FedEx. This is probably because all of our ships have entry way jump seats, except for the 767's which have the jump seats on the flight deck itself. Several years back we installed locking ballistic doors on the MD10's and 11's. It was an interesting project...

Jump to post
by gregorygoodwin
Wed Dec 16, 2020 11:06 pm
Forum: Technical/Operations
Topic: The smell of flying!
Replies: 19
Views: 3587

Re: The smell of flying!

I still get to experience the jet fuel smell as a maintenance tech at the FedEx IND hangar. You can definitely tell when fuel panels are opened and the fuel leak crew is working, it's over-powering at times. Also, when we taxi a ship from the hangar to the flight line, you can stand at the hangar do...

Jump to post
by gregorygoodwin
Thu Nov 12, 2020 12:37 am
Forum: Travel, Polls & Preferences
Topic: Boeing 737 and 767 question
Replies: 4
Views: 2173

Re: Boeing 737 and 767 question

FedEx is still receiving B767-300F's and will be for a while. While UPS flies the 767, I'm not sure if they are still on the order books or if their fleet is now complete. Have read some press articles about aviation that stated that Boeing was thinking of a updated 767 freighter. It supposedly woul...

Jump to post
by gregorygoodwin
Thu Oct 22, 2020 8:42 pm
Forum: Technical/Operations
Topic: Fasteners on composite aircraft
Replies: 10
Views: 2952

Re: Fasteners on composite aircraft

With further reading of the various Boeing SRM's, I found that to install aluminum fasteners into dissimilar material, the preferred method is to coat the fastener or the fastener hole with BMS 5-95 sealant (PR1422). The secondary preferred method is to coat with BMS 10-11 primer (epoxy primer). The...

Jump to post
by gregorygoodwin
Wed Oct 21, 2020 9:33 pm
Forum: Technical/Operations
Topic: Fasteners on composite aircraft
Replies: 10
Views: 2952

Re: Fasteners on composite aircraft

In my experiences with solid shank aluminum rivets, they are not coated. The rivets we install on the 757 fan cowl edges are a bare 2117 AD alloy. You can buy 1100 A series rivets that are pure unalloyed aluminum. These are not used in a structural load bearing setting as they are a very soft low st...

Jump to post
by gregorygoodwin
Tue Oct 20, 2020 11:40 pm
Forum: Technical/Operations
Topic: Fasteners on composite aircraft
Replies: 10
Views: 2952

Re: Fasteners on composite aircraft

I agree with you in that it's a rabbit hole of sorts and I've worked heavy aircraft structures for over 35 years now. As stated in the B757 and B767 Structures Repair Manuals, the use of fasteners in a CFRP-to-CFRP application would be a titanium or CRES (corrosion resistant steel) fastener. The CRE...

Jump to post