2) why not put some foam on the ground, or water, before the airplane lands so the landing gear doesn't catch on fire? The only thing that can easily exit the aircraft and burn are fuel and hydraulic fluid. Metal can spark but does not burn. Tyres can burn but it takes a lot of effort. Certain meta...Jump to post
The blast pad is the area before the beginning of the runway and the term is to differentiate it from a displaced threshold. 30+ in the industry and I’ve never heard that area referred that way. Always something new to learn in the industry. The only time I did run-ups in/on a designated run-up pad...Jump to post
Looking at this Jep:
You can see that the areas north of A & B1 are labeled as “Blast Pads”.
What did the West do to Muslims to cause such anger? I've been STRUGGLING to understand this since 9/11. You’re asking the wrong question. Your question is laying blame on the victims. You’re question is analogous to asking what a woman was doing wrong that got her raped. The question that needs to...Jump to post
Now its possible what I was taught was wrong, but I was also told in school that the system also made it easier to get a results as, some remote areas could have a hard time getting votes reported but that for the national level those results may not be required to determine who gets the electoral ...Jump to post
bennett123 wrote:Why did they set up the Electoral College in the first place?.
Short answer: The Founders realized that densely populated areas could heavily skew a national election. The Electoral College brings some parity to the system. For a detailed answer, just ask the Google machine. I’m sure there has been more written about the Electoral College than you would care to...Jump to post
unimproved wrote:And on Boeing it's a mechanical receptacle. Takes about 10 minutes to open with a power drill but if you follow the sticker it's only by hand.
As in just about everything in aviation, it depends. On the B747, you can open both the forward and aft doors from the inside. There is a master latch lock release inside and outside. There is an open/close switch both inside and outside. You can close the doors from the inside, but you can’t lock t...Jump to post
I haven’t worked pax in a long time, but I seem to recall our standard turn time for a B727-200 was 23 mins and a B757 was 27 minutes, or there about. Our wide bodies were a little more...maybe 40 minutes on a B767, and 55 on an L1011? Hmmm, just re-read the OP. If you’re talking gate utilization, t...Jump to post
Early, and in person, yesterday. It took me longer to decide how to vote for for Soil Conservation Commissioner than it did to verify my identity and obtain my ballot.
By the way, I took my daughter (18) to vote for the first time. She was so happy with herself..as was I.
Generally, I’m ok with someone choosing when it’s time to go. My wife and I discussed it when I was diagnosed a little under 4 years ago. (Happy to say that I am 3 years, 4 months cancer-free). My concerns revolve around competency and the doctor involved in the procedure/process. Competency issues ...Jump to post
Wouldn't that be possible with jet engines as well? I assume this is a procedure only trained in the military... but I could imagine this might work with commercial jet powered aircraft as well. It might be possible on a low bypass engine, but not probable. In a typical jet engine, the fan is not d...Jump to post
My personal opinion: an engine is not running if the core is not turning. No N2 (N3); then the engine is not running and it is safe to approach. I’d just about guarantee that the FCOM procedure cited above is related to the core and not the fan. In fact, can you see fan speed (N1) on newer engines w...Jump to post
Tuch the Fan? The fan needs to be just about stopped before you can get a hold of it. Too much mass there.
As for standing in front of the inlet? Almost immediately. The low pressure in front of the fan dissipates within seconds of shutdown.
They are huge and good question, I think so but am not sure, not flown the 763 but I did fly the 762 and I think the gear is normally extended and retracted hydraulically on that aircraft Strangely, the AMM does not clearly state that the main gear is hydraulically driven down. In fact, the wording...Jump to post
VMCA787 wrote:IIRC, it is nosewheel oleo extension that triggers the centering mechanism.
If I am not mistaken, the AMM does not mention the procedure and the lockout devices that AMTs must to use to deactivate aircraft systems. I'm not sure where you get that idea. The AMM has several instances where it instructs the AMT to make a system safe, or deactivate it to prevent injury or dama...Jump to post
At the carrier I worked as a crew scheduler for pilots were always adamant that we refer to it as a Functional Check Flight, as test flights were for experimental aircraft, and those pilots got paid way more. That reminds me of an FAA inspector we had that insisted that any repair that wasn’t perma...Jump to post
The entire 747 family gives you 13 degrees of steering either side of neutral and 73 degrees with the tiller. 13 degrees is too much. From the AMM for the -8 (the -400 is similar) Directional Control Steering from the rudder pedals is limited to 7 DEG (Degree) left and right. Input from the tillers...Jump to post
IIRC the earliest 747 Classics did not all have nosewheel steering through the rudder pedals, only the tiller I’m not so sure about that. I’ve worked on the earliest of B747, when they were PanAm and later in their cargo incarnations, and they all had rudder pedal steering. I see very little advant...Jump to post
It might be the ADP exhaust bc i'd always remember it being on the left side right around the wheel well
762's have a exhaust port under the mid-section of the a/c. when i was a ramp worker it kept us nice and warm during the christmas rush at amazon. Those (there are 2 of them) are the pack exhausts. Or, maybe you’re referring to the ADP exhaust on the left side of the aircraft, just aft of the wheel...Jump to post
It's been years since I've heard this, but a 75/76 driver once told me that the yoke feel was different between the two. If I remember correctly, he said the 75 was "looser," requiring more range of deflection compared to the 76, which felt "tighter" to him. Can anyone confirm/d...Jump to post
What are GMM, GPP, GOM? Are these FAA approved LOTO manuals? General Maintenance Manual, General Policies and Procedures Manual, Ground Operations Manual. These are Some of the different manuals, among many others, that operators use to govern their maintenance and ground operations. They are FAA a...Jump to post
Not an issue on the much more comfortable, quieter and roomier 767 cockpit Strange. Boeing did some redesign of the equipment cooling system on our new build B767's to quiet the cockpit due to complaints of higher noise levels on our old ones. Yes, the 767 has that unique ‘space creating panel’ tha...Jump to post
I guess it can be done on an exception basis but procedures and prudence dictate against it. You'd also need to have a qualified person on the flight deck to monitor the engine. Fueling the aircraft gets a little more...interesting, from a procedures standpoint. Even though the inlets are up higher,...Jump to post
This is different than on the Douglas DC-8. On these planes, the landing gear remain up with hydraulic pressure and the uplocks being a backup. A hydraulic leak/loss is not as critical on the Douglas than it would be on the Boeing series. Correct, on the DC-8, after the gear went up, the flight cre...Jump to post
Trimeresurus wrote:What would happen if you left it in UP position for the entire flight? Would it slowly depressurize anyway?
Not a driver here, so I can't speak to specific procedures, but as I recall, the center tank on the B727 is the #2 tank. So, when you burn the #2 down to the quantity in the wings, you're actually switching to tank-to-engine when you close the cross-feeds and turn on the wing pumps.Jump to post
Interesting, I was told that the FAA has exclusive jurisdiction on the airside. Wrong, I guess. But, https://www.osha.gov/laws-regs/standardinterpretations/1990-11-14 Interesting, but it's also 30 years old, and I have personally provided responses to out Health & Safety folks for response to O...Jump to post
It’s, by law, the FAA’s jurisdiction, that’s why. Airside, airplanes, all FAA, OHSA has no jurisdiction. Nope, we see OSHA on the airside all the time. Why FAA get involved on this matter? Where are the instructions for LOTO located? They are in the AMM. If you don't follow the instructions in the ...Jump to post
Old folks know from school that 3 things are needed for fire. Fuel, oxygen & heat...ye old fire triangle. Now-a-days, we are taught about the fire tetrahedron...fuel, oxygen, heat & the chemical reaction. To extinguish a fire, one of the components must be removed. When we depressurization a...Jump to post
No. The longer an aircraft has been in production, the more the manufacturer may tinker with it. Our early B767’s have quite a few differences from our newly delivered ones. The addition of the NGS, some changes to the equipment cooling and the CRT/LCD swap over, to name a few. There are numerous pa...Jump to post
A picture of the APU exhaust on top of the right wing: A torching APU was always an interesting sight, and rather exciting if there were passengers onboard. A nice picture of the APU in the wheel well: Wow, I just had a flashback to changing the generator on that APU. All funnies aside, I read that...Jump to post
This election: the Democrats are voting against someone, the Republicans are voting for someone. It’s hard to win that way.
It’s the same thing that happened with Obama/Romney in 2012.
They all had a serial number on them. Since they were consumables? Why would they need to be Tracked? The operator may not track them, but the manufacturer may. Probably to the “we sold XXXX serial number to XX operator”. I’ve never worked with O2 generators, but if they have a serial number, and y...Jump to post
Some time ago I was jumpseating on an MD11 and while descending, all the way through the approach, the captain would continue to bring the throttles to idle, or near enough. While on final, he mentioned to the FO that “he hates when it does that”. Being in maintenance, after the flight I asked him i...Jump to post
I was at an airshow once and a B-52 that had done a flyby had a fuel system issue, so they couldn't go back to wherever and had to land. Turned out they couldn't do automated refueling because the fuel system computer was konked out. So they had to overwing it. It took 16 hours... Not only slower b...Jump to post
No, it is a characteristic of the wing design, dihedral. Pressure refueling is pretty reliable and I doubt any airliner has been overwing refueled in the last 30 years. Like I said, 30 plus years, and the only time I've had that cap open was to inject biocide. I think I had a leak once, but that ma...Jump to post
There are just so many. I grew up during the classic era of Rock & Roll Led Zeppelin - Physical Graffiti Led Zeppelin - IV Fleetwood Mac - Rumours The Clash - London Calling Beastie Boys - Licensed to Ill Billy Joel - The Stranger Metallica - Master of Puppets Pink Floyd - Dark Side of the Moon ...Jump to post
If you have any interest in WWII other than specific points in history, you may want to listen to this podcast:
https://podcasts.apple.com/us/podcast/t ... 1219771711
Just listening to the casualty numbers is sobering.
I couldn't find any of the Classic info I was looking for, but found that the -400 does have a fill port in each main tank. The ports are located on/in the inboard section of each tank. From their position, I can't see that the tank would ever be completely full. Strange thing, I couldn't find the q...Jump to post
The practice of using overwing fueling I posted about was on regularly scheduled flights though That wouldn’t work as you described, the over wing ports tend to below the max level of the tank, and in the case of the classics, only #2 & #3 had ports, to the best of recollection. Now, if you wan...Jump to post
There were definitely overwing fueling ports on the classics, but they were well below the max level of the tank. And, I’m pretty sure it was only the #2 & #3 tanks. I no longer have access to the AMM for the classic, but I may be able to find some old training material when I get to work tomorr...Jump to post