Moderators: richierich, ua900, PanAm_DC10, hOMSaR
Quoting Rainmaker (Reply 1): Out of curiosity, are the flight test frames being shipped to WA in one piece or in parts for later reassembly in site? |
Quoting Rainmaker (Reply 1): Out of curiosity, are the flight test frames being shipped to WA in one piece or in parts for later reassembly in site? Wither way it sounds like a costly flight test programme to me. |
Quoting Rainmaker (Reply 1): Out of curiosity, are the flight test frames being shipped to WA in one piece or in parts for later reassembly in site? Wither way it sounds like a costly flight test programme to me. |
Quote: Mitsubishi Aircraft has disclosed that two pilots with military experience will be piloting the MRJ regional jet on its first flight next week. |
Quote: It adds that low speed taxiing tests started in June, but that it still needs to conduct medium speed taxi tests at 100 knots (185km/h) and high speed taxi tests at 120 knots, before the aircraft is able to take its first flight. |
Quote: Mitsubishi Aircraft has announced a two-week delay to the MRJ regional jet's first flight, citing issues with the aircraft’s steering pedal. |
Quoting KarelXWB (Reply 6): Mitsubishi Aircraft has announced a two-week delay to the MRJ regional jet's first flight, citing issues with the aircraft’s steering pedal. |
Quoting mats01776 (Reply 11): High-speed taxi/braking test on Oct 23, 2015: http://www.youtube.com/watch?v=M7rdB5lvizI |
Quoting Mats01776 (Reply 14): Hi-speed testing at over 200Km/h was conducted on Nov. 6, 2015: |
Quoting r2rho (Reply 4): It is interesting though, that Mitsubishi is tapping into existing flight test expertise in Seattle, rather than doing it all themselves, by setting up an engineering center with local engineers (plus some of its own). |
Quoting ordell (Reply 16): Did anyone recognize the yellow plane she cruised past at the 1:44 mark? |
Quoting ordell (Reply 16): And with all the flight expertise at Boeing, it's easier to ship a few planes and pilots to Washington than bring a whole bunch of Boeing engineers to Japan. |
Quoting Mats01776 (Reply 35): |
Quoting Paolo92 (Reply 36): I see this configuration being critical on very full flights with lots of baggage, rather than on average ones, given the aircraft configuration. |
Quoting Mats01776 (Reply 38): Being a regional jet with short stage lengths, I can see some scenarios where most of the passengers opt for carry-on baggages rather than checked-in ones, resulting in nose-heavy aircraft. |
October 1, 2016 2:00 am JST
Mitsubishi jet delivery pushed back again
NAGOYA -- Initial delivery of Mitsubishi Aircraft's regional passenger plane will be postponed beyond the current target of mid-2018 owing to design changes, it was learned Friday.
The unit of Tokyo-based Mitsubishi Heavy Industries has notified partners of the delay. The first Mitsubishi Regional Jet is now likely to be handed off to buyer ANA Holdings in 2019 or later.
...
More test aircraft have since been added to move development along. Volume production has begun as well. But Mitsubishi Aircraft has taken another look at the MRJ's design to rebalance the aircraft after apparently repositioning certain components. The changes apparently rule out mid-2018 delivery. The delay is not expected to affect ANA's flight plans.