Hi,
I hope to get on this way some hints to improve my skills to identify such problems.
https://imgproc.airliners.net/photos/ai ... 4031e694b8
Reasons are:
- heat haze
- oversharpenend
Can someone help me out, in a friendly manner, where I can find these areas.
Thanks in advance!
Regards
Moderators: richierich, ua900, PanAm_DC10, hOMSaR
-
- dutchspotter1
- Posts: 532
- Joined:
Re: Reject
Heathaze: bottom of the front fuselage, although it might be an optical illusion caused by the severe heathaze on the runway behind the aircraft.
Oversharped: not a clue
Besides the aircraft is a little low in frame, I'd say it is still acceptable but wouldn't be surprised if that becomes a rejection reason on a possible next attempt. Same applies for a little high contrast.
Oversharped: not a clue
Besides the aircraft is a little low in frame, I'd say it is still acceptable but wouldn't be surprised if that becomes a rejection reason on a possible next attempt. Same applies for a little high contrast.
-
- Crosswindphoto
- Posts: 379
- Joined:
Re: Reject
The HH is only barely visible around the bottom of the front wheels, I think it could be an illusion. I personally don't see any OS, however the contrast is a bit high and it is LIF.
Tim
Tim
Who is online
Users browsing this forum: No registered users and 12 guests