https://www.airliners.net/addphotos/r...20110721_a1310621976.5154ek777.jpg
Hello All:
This photo was rejected for a yellow tint. I'm sorry to say that my editing skills PS Element (7) are limited beyond the ANet tutorial. Is there away to improve this photo without screwing it up?
Thanks, Bob
Moderators: richierich, ua900, PanAm_DC10, hOMSaR
RE: Post Screening Yellow Tint
HI Bob
Yeah there is a bit of yellow cast in there. That should be easy to fix, provided you have the unedited TIFF, Just go to the Color Balance window and add a some blue to the shot.
Steven-was that in LAX?
Yeah there is a bit of yellow cast in there. That should be easy to fix, provided you have the unedited TIFF, Just go to the Color Balance window and add a some blue to the shot.
Steven-was that in LAX?
RE: Post Screening Yellow Tint
Hi Steven
Thanks for the info. I do have the TIFF and yes this was taken from the park across from the In n Out.
Regards, Bob
Thanks for the info. I do have the TIFF and yes this was taken from the park across from the In n Out.
Regards, Bob
RE: Post Screening Yellow Tint
If you have a saved PSD file of your fully edited shot, you could just add an adjustment layer for curves (Layer -> New -> Adjustment Layer -> Curves), and then use the curves to remove the yellow (though you'll have to gauge that in terms of RGB). That way you don't have to do any other work over again.
[Edited 2011-07-28 13:12:36]
[Edited 2011-07-28 13:12:36]
Who is online
Users browsing this forum: No registered users and 5 guests