Moderators: richierich, ua900, hOMSaR

 
TB500
Topic Author
Posts: 6
Joined: Sat Oct 05, 2019 11:48 am

Why is there residual oil in a preserved or new engine?

Thu May 21, 2020 10:43 pm

I saw some videos on YouTube where a new (/preserved) engine starts and a fire ball and much smoke come out of the tailpipe.

https://youtu.be/sNwG9vC5qnM
https://youtu.be/ZEPhgZeZARI
https://youtu.be/EDc8o_h-dn0

Below these videos some people explain that the engines are just burning residual oil out of the engines hot section (combustion chamber and turbine I guess) as the engine is started for the first time. This was generally known as 'wet start'.

My question is: Why is there any residual oil in the new/preserved engine in the first place?

I don't work in the aviation industry so I don't know what happens during the construction or preservation process of a jet engine but I think the parts are put together so that it must be possible to remove any oil from the components/sections. Therefore you could conduct the first start of the engine without a fire ball or much, much smoke.

This may also reduce the wear on the components of the engine as well as the wings if the engines are mounted below them.

Gesendet von meinem SM-G973F mit Tapatalk
 
User avatar
Stitch
Posts: 26958
Joined: Wed Jul 06, 2005 4:26 am

Re: Why is there residual oil in a preserved or new engine?

Thu May 21, 2020 11:14 pm

My guess is that they pre-lubricate the parts so that when the engine starts for the first time you don't have bare metal against bare metal. It could also be used as an anti-corrosive agent while the engine is being shipped.
 
7673mech
Posts: 539
Joined: Tue Mar 30, 2004 10:10 am

Re: Why is there residual oil in a preserved or new engine?

Sat May 23, 2020 5:33 pm

The oil is a preservative to prevent corrosion.
 
Tristarsteve
Posts: 3653
Joined: Tue Nov 22, 2005 11:04 pm

Re: Why is there residual oil in a preserved or new engine?

Sun May 24, 2020 1:22 pm

The fuel system is filled with a thin preserving oil when the engine leaves the factory.
After installation, you drain this oil out via the fuel filter drain, but there is always some left. On the initial engine start this oil has to leave the engine via the burners before the fuel can get there and ignite.
The oil can then ignite in the jet pipe.

Who is online

Users browsing this forum: 738Pilot and 20 guests

Popular Searches On Airliners.net

Top Photos of Last:   24 Hours  •  48 Hours  •  7 Days  •  30 Days  •  180 Days  •  365 Days  •  All Time

Military Aircraft Every type from fighters to helicopters from air forces around the globe

Classic Airliners Props and jets from the good old days

Flight Decks Views from inside the cockpit

Aircraft Cabins Passenger cabin shots showing seat arrangements as well as cargo aircraft interior

Cargo Aircraft Pictures of great freighter aircraft

Government Aircraft Aircraft flying government officials

Helicopters Our large helicopter section. Both military and civil versions

Blimps / Airships Everything from the Goodyear blimp to the Zeppelin

Night Photos Beautiful shots taken while the sun is below the horizon

Accidents Accident, incident and crash related photos

Air to Air Photos taken by airborne photographers of airborne aircraft

Special Paint Schemes Aircraft painted in beautiful and original liveries

Airport Overviews Airport overviews from the air or ground

Tails and Winglets Tail and Winglet closeups with beautiful airline logos